Podrobné informácie o tovare

Banana Pi (dual-core 1GHz SoC,1GB DDR3 SDRAM)

Kód: 013501
Banana Pi (dual-core 1GHz SoC,1GB DDR3 SDRAM)

Žiadne hodnotenie.
Výrobca: SINOVOIP CO.,LTD
Tovar nie je na sklade. Termín dodania sú 2-3 dni.
41,86 €
(41,86 €/Ks)
 






Banana Pi (dual-core 1GHz SoC,1GB DDR3 SDRAM)
Banana Pi (AllWinner A20 dual-core 1GHz SoC, 1GB DDR3 SDRAM)
It’s an open-source single-board computer. It can run Android 4.4, Ubuntu, Debian, Rasberry Pi Image, as well as the Cubieboard Image. It uses the AllWinner A20 SoC, and has 1GB DDR3 SDRAM. Built with ARM Cortex-A7 Dual-core CPU and Mali400MP2 GPU, and open source software, Banana Pi can serve as a platform to make lots of applications for different purposes.
Banana Pi has multiple extensible connectors for users to develop their own amazing projects and applications. Most of common extension accessories Including LCD panel, touch screen, camera module, UART console and GPIO control pins are accessible from Banana Pi on-board connectors and headers. Banana Pi has 26-pins GPIO headers to extend the functions such as I2C, SPI, 5V and 3.3V output…etc. There are also additional GPIO pins available for extension controls and daughter boards. For instance, you can use those headers to connect an Arduino board for your projects. Here could be the start point for your way of exciting applications. CON3 is a DIP-26 headers. The header pin definitions of CON3 are shown as below. You can connect the headers for I2C, UART, SPI connections. The 5V and 3.3 V power output are also available here. Meanwhile, there are several pins free for GPIO pins for your specific usage.

Hardware specification
CPU
A20 ARM® Cortex™-A7 Dual-Core
GPU
ARM Mali400MP2 Complies with OpenGL ES 2.0/1.1
Memory (SDRAM)
1GB DDR3 (shared with GPU)
Onboard Storage
SD (Max. 64GB) / MMC card slot UP to 2T on SATA disk
Onboard Network
10/100/1000 Ethernet RJ45 (optional USB WIFI Dongle)
Camera Input
A CSI input connector allows for the connection of a designed camera module
Sound Input
Mic
Video Outputs
HDMI, CVBS , LVDS/RGB
Audio Output
3.5 mm Jack and HDMI
Power Source
5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports
2 (direct from Allwinner A20 chip)
Buttons
Reset button: Next to MicroUSB connector
Power button: Next to Reset button
UBoot button (optional): Behind HDMI connector
GPIO(2X13) pin
GPIO,UART,I2C bus,SPI bus with two chip selects,
CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED
Power Status LED (Red)
Ethernet Status LED (Blue)
User Define LED (Green)
Remote
IR
Facebook Komentáre
Cenový alarm

Radi vás budeme informovať o zníženie ceny pod vami zadanú čiastku.

captcha
Zobraziť iný kód
Dostupnostný strážny pes

Radi vás budeme informovať o naskladnení produktu.

captchaZobraziť iný kód
Hodnotenie
Tento tovar zatiaľ nikto nehodnotil. Buďte prvý a napíšte komentár alebo hodnotenie.